Home

Philips Waterproof Fixtures

Philips Waterproof Fixtures

Noxion LED Waterproof fixtures are specially designed to resist water from any direction. Depending on the hight of the IP rating, this water can be a little or a lot. For example, a fixture with IP40 can resist small amounts of water and because of that, it can be placed under a shelter. But it cannot resist a storm, like a fixture with IP65 can. You can use the filters on the right to choose the right IP rating, IK rating (which indicates the impact protection) or the light color. Waterproof fixtures are not only used outdoors but also in moist areas like swimming pools or certain factories.

Philips Floodlights
Philips Battens
Philips Wall Lights
Philips LED High-Bay Lighting
Waterproof LED Battens
LED Waterproof Fixtures

Filter inCategory

Too much choice?

Find the product in 3 steps!

Help me choose!

Current refinements:

Only in Stock

Product Type Category

LED Waterproof Batten 121
LED HighBay 104
LED Floodlight 89
LED Bulkhead 55
LED spotlight 50

Colour Code

Explanation

The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).

840 Cool White 294
830 Warm White 103
740 Cool White 81
865 Daylight 28
827 Extra Warm White 15

Colour temperature (Kelvin)

Explanation

4000 Cool White 378
3000 Warm White 107
6500 Daylight 28
2700 Extra Warm White 16

Light colour options

Explanation

The colour control type tells you in which way you can regulate the colour of the light. You have the following options:

Single colour: This light has one fixed light colour. You cannot change it.
CCT: You choose from 2 or 3 fixed colours via a switch, such as warm white or cool white.
Tunable white: The white light can take any values in the listed Kelvin scale, for instance 2200K up to 6500K.
Dim to warm: Dimming makes the light warmer (more yellow). The more you dim, the warmer the colour.
RGB: You can set the light to almost any colour. From red to blue, you fill it in completely as you wish.

By choosing your preferred light colour options, you are one step closer to the right light product.

Single Color 492
CCT 15
Dim to Warm 2
Tunable White 1

Wattage

Explanation

The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).

< 5W 2
5W - 9W 43
10W - 19W 89
20W - 29W 59
30W - 39W 57

Luminous Flux (Lumen)

Explanation

The number of lumens (lm) is the light output of a light source. The higher the number of lumens, the more light the light source emits. The wattage and the number of lumens are not connected to each other. An LED lamp with a low wattage can have a higher number of lumens than a conventional lamp with a high wattage.

>35000 24
201 - 300 2
301 - 400 1
401 - 500 1
501 - 600 7

IP-rating

Explanation

The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.

IP65 254
IP66 144
IP54 50
IP44 40
IP54/IP20 27

Impact Protection (IK)

Explanation

The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.

IK08 - 5 joules 231
IK07 - 2 joules 66
IK03 - 0.35 joule 55
IK09 - 10 joules 49
IK02 - 0.20 joule 43

Dimmable

Explanation

Dimmable bulbs work in combination with a dimmer switch and allow you to determine the desired light output. Dimming also provides energy saving potential because less power is required when the lamp is producing less light.

Not Dimmable 299
Dimmable with Dali 120
Dimmable 71
Dimmable with Philips Interact 19
1-10V Dimmable 5

Mounting

Explanation

Are you specifically looking for an (LED) fixture that you can install on the ceiling, wall or floor? With this filter, you can easily select your preferred type of mounting. Please note that certain fixtures can be mounted in multiple ways using the installation materials supplied (e.g. a LED bulkhead). Mounting is also possible using individually purchasable fixture accessories, such as a frame or suspension kit for a LED panel.

Surface 225
Recessed 101
Pendant 44
Ceiling 29
Post top 24

Type of sensor

Explanation

Lighting with a sensor only turns on when it receives a specific signal. This reduces energy costs. The (built-in) sensors respond to darkness (twilight switch) and/or movement (motion sensor).

No Sensor 467
Light Sensor 48
Motion Sensor 39

Beam Angle (degree)

Explanation

A beam angle indicates the angle of the light beam coming from a light source. The smaller the radiation angle in degrees (D), the narrower the beam angle.

Narrow <24D 18
Medium 25D - 40D 67
Wide 41D - 90D 160
Very Wide >91D 65

Emergency Lighting

Explanation

Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.

No Emergency Unit 254
3H Emergency Light 27
1H Emergency Light 1

Length (mm)

Explanation

It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.

Less than 25 cm 26
25 - 50 cm 61
50 - 75 cm 87
75 - 100 cm 6
100 - 125 cm 54

Energy efficiency class

Explanation

Every bulb or fixture has an energy efficiency class A to G. Energy label A is the most efficient and G the least. LED lighting is the most sustainable lighting technique. Even if a LED bulb is rated E or lower, they still save 70% of energy compared to conventional lighting with the same energy label. Why is it the same label then? To motivate LED brands to get even more durable.

Any Lamp all-in warranty

Explanation

Our all-in warranty is fully included in the product price and covers both hidden defects and technical defects of the product that occurred before delivery. The warranty period differs per product and ranges from 1 year to a maximum of 7 years.

5 Years 434
3 Years 70
1 Year 11

Show products

Too much choice?

Help me choose!

Current search

1-24 out of 515 results found

Filter

Sort by

Philips LED Waterproof Batten CoreLine WT120C Gen2 25/43W 3700/6000lm - 840 Cool White | 150cm

Compare this product
Philips LED Floodlight Ledinaire BVP167 50W 6000lm 110D - 830-840-865 CCT | IP65 - Symmetrical

Compare this product
Philips LED Floodlight Ledinaire BVP169 100W 12000lm 110D - 830-840-865 CCT | IP65 - Symmetrical

Compare this product
Philips LED Security Coreline BWC110 Black 9W 900lm - 830 Warm White | 242x110mm - IP54 - Light Sensor

Compare this product
Philips LED Waterproof Batten CoreLine WT120C G2 42.9W 6000lm - 840 Cool White | 150cm

Compare this product
Philips LED Security Coreline BWC110 White 9W 900lm - 830 Warm White | 242x110mm - IP54 - Light Sensor

Compare this product
Philips LED Waterproof Batten Ledinaire WT065C 23/42W 2900/4800lm - 840 Cool White | 120cm

Compare this product
Philips LED Floodlight Ledinaire BVP167 50W 6000lm 110D - 830-840-865 CCT | IP65 - Motion and Light Sensor - Symmetrical

Compare this product
Philips LED Floodlight Ledinaire BVP167 20W 2400lm 110D - 830-840-865 CCT | IP65 - Symmetrical

Compare this product
Philips LED Floodlight Ledinaire BVP169 200W 24000lm 110D - 830-840-865 CCT | IP65 - Symmetrical

Compare this product
Philips LED Floodlight Ledinaire BVP167 10W 1200lm 110D - 830-840-865 CCT | IP65 - Symmetrical

Compare this product
Philips LED Floodlight Ledinaire BVP169 150W 18000lm 110D - 830-865 CCT | IP65 - Symmetrical

Compare this product
Philips LED Waterproof Batten Ledinaire WT060C 15W 1800lm - 840 Cool White | 60cm

Compare this product
Philips LED Waterproof Batten Ledinaire WT060C 46W 5600lm - 865 Daylight | 150cm

Compare this product
Philips LED Waterproof Batten CoreLine WT120C Gen2 57W 8000lm - 840 Cool White | 150cm

Compare this product
Philips LED Floodlight Ledinaire BVP167 30W 3600lm 110D - 830-840-865 CCT | IP65 - Symmetrical

Compare this product
Philips LED Floodlight Ledinaire BVP167 70W 8400lm 110D - 830-840-865 CCT | IP65 - Symmetrical

Compare this product
Philips LED Floodlight Ledinaire BVP167 20W 2400lm 110D - 830-840-865 CCT | IP65 - Motion and Light Sensor - Symmetrical

Compare this product
Philips LED Waterproof Batten Ledinaire WT065C 30/53W 4100/6800lm - 840 Cool White | 150cm

Compare this product
Philips LED Waterproof Batten CoreLine WT120C G2 29W 4000lm - 840 Cool White | 120cm

Compare this product
Philips LED Security Coreline BWC120 Black 14W 1800lm - 830 Warm White | 282x178mm - IP54 - Light Sensor

Compare this product
Philips LED Waterproof Batten CoreLine WT120C Gen2 18/32W 2700/4500lm - 840 Cool White | 120cm

Compare this product
Philips LED Floodlight Ledinaire BVP167 30W 3600lm 110D - 830-840-865 CCT | IP65 - Motion and Light Sensor - Symmetrical

Compare this product
Philips LED Bulkhead Ledinaire WL070V Gen 2 White 17W 1700lm - 830-840 CCT | 300mm - IP65

Compare this product

View quotation